http://www.in5d.com
October 21, 2014, 02:59:58 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
   Home   Help Search Media GoogleTagged Gallery Login Register Chat  

Pages: [1]
  Print  
Author Topic: Puma Punku  (Read 6154 times)
in5d
Administrator
Hero Member
*****

Karma: 13
Offline Offline

Posts: 588



« on: January 17, 2010, 08:06:45 PM »

Great Pyramids vs Puma Punku


The Mysterious And Intriguing Ruins Of Tihuanaco And Pumapunku (The video's owner prevents external embedding)

Puma Punku


Puma Punku, truly startles the imagination. It seems to be the remains of a great wharf (for Lake Titicaca long ago lapped upon the shores of Tiahuanaco) and a massive, four-part, now collapsed building. One of the construction blocks from which the pier was fashioned weighs an estimated 440 tons (equal to nearly 600 full-size cars) and several other blocks laying about are between 100 and 150 tons. The quarry for these giant blocks was on the western shore of Titicaca, some ten miles away. There is no known technology in all the ancient world that could have transported stones of such massive weight and size. The Andean people of 500 AD, with their simple reed boats, could certainly not have moved them. Even today, with all the modern advances in engineering and mathematics, we could not fashion such a structure.

How were these monstrous stones moved and what was their purpose?
Posnansky suggested an answer, based upon his studies of the astronomical alignments of Tiahuanaco, but that answer is considered so controversial, even impossible, that it has been ignored and censured by the scientific community for fifty years.




Carved stone block at Puma Punku. This precision-made 6 mm wide groove contains equidistant, drilled holes. It seems impossible that this cuts were made with use of stone or copper tools.


The so-called Gate of the Sun seen at the back side. Made of one piece of hard rock. Possibly it was a part of a large wall.  By the courtesy of www.inkatour.com, nr. 3696

Puma Punku doesn’t look impressive: a hill as remains of an old pyramid and a large number of megalithic block of stone on the ground, evidently smashed by a devastating earthquake. However, closer inspection shows that these stone blocks have been fabricated with a very advanced technology. Even more surprising is the technical design of these blocks shown in the drawing below.  All blocks fit together like interlocking building blocks.


Source: Jean-Pierre Protzen & Stella E.Nair, “On Reconstructing Tiwanaku Architecture”, Jpurnal of the Society of Architectural Historians, Vol. 59, Nr.3, 2000, pp. 358-371





A wall of the Akapana, the pyramid of Tiahuanacu, shows similar modular design.  Blocks that are piled one on top of the other but the underside of the upper stone is cut at an angle. The top of the standing stone is cut at the same angle, as shown on the figure below.


Source: Jean-Pierre Protzen & Stella E.Nair, “On Reconstructing Tiwanaku Architecture”, Jpurnal of the Society of Architectural Historians, Vol. 59, Nr.3, 2000, pp. 358-371

This stone technology plainly contradicts what official archaeology suggests about the general state of development of the ancient peoples of South-America.


Source: "Die Ruinenstätte von Tiahuanaco im Hochlande des alten Peru" (The Ruins of Tiahuanaco in the Highlands of Ancient Peru)
1892 book about Tiahanaco written by two German discoverers and engineers Alphons Stübel and Max Uhle


http://www.world-mysteries.com/mpl_6.htm
Logged
in5d Forum
« on: January 17, 2010, 08:06:45 PM »

 Logged
Pages: [1]
  Print  

 
Jump to:  











Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!